Any equipment that we buy, comes with its own predefined norms and conditions. It is necessary for us to follow those norms and instructions so that we can properly work with it. Our present article on, 10 Safety Tips When Using A Router Table relates to such instructions that we need to follow for assuring the safety of the operator while using the router table.
Safety Tips When Using A Router Table – Top 10 Things We Must Follow
Here are some of the must follow Safety Tips When Using A Router Table. Following these safety tips, we will be able to effectively use the top performing router table in any kind of manner. Kindly go through them and use the router table with a lot of conveniences.
Refer the User Manual before Using
Before starting with the use of any appliance, referring the user manual is a pre-requisite. Only then we will be able to use it in an effective manner.
Every router table comes with a necessary set of instructions as well as a user manual. Referring each of the points clearly, we will be able to use the table properly. It might be offering us with a variety of features, which we might not be aware of.
It might be offering us with a variety of features, which we might not be aware of. Hence, we can also determine the same from the manual itself. It also consists of the things that we must take care of and the other essential parts.
Selecting the right wear at the right time
There are various kind of gears in the router table so that we can use it properly. It is necessary for us to select the proper kind of gear before beginning with the operation.
Apart from that, we must also wear the proper kind of clothes while using the table. Wearing loose clothes is a cause behind many kinds of accidents. Even wearing some accessories can also cause an accident. Hence, we must avoid them while working with the Router Table.
Protecting our eyes and ears is also necessary while using the router table. These parts are more exposed to injuries due to the flying parts. There are also other things that we must wear such as gloves, aprons, helmets, protection gear and a lot more. Due to this, we must use the safety appliances as per your convenience.
Check before starting
Right before you are going to start with the operation of the Router Table, we have to check out some things. Such as the position of the router as well as that of the workpiece. Even the drill bit should be in a proper manner.
While the electrical connection of the table must be off, it should also be taken into consideration that the setup of the router table is done in a proper manner.
Make use of Fences and Featherboards
The main purpose of the Fence and the Featherboards is to hold the workpiece in a proper position. If we make the proper use of these fences and feather boards, it will reduce a lot of burden from our head about the operating of the router table.
It will also result in making fewer efforts for us. Due to this, we must enforce in properly setting up these fences and feather boards.
Don’t overload the Router Table
Overloading the router table affects it’s performance to a greater extent. Due to this, we must not overload it. It is having a prescribed limit and we must keep the level of the weight in the same limit.
We can use the table with a variety of routers, but it should be taken care that the router must fit properly on the table.
Drawing the Safety Lines
We must also decide some imaginary safety lines before starting to work with the router table. This will avoid any kind of ambiguities and possibilities of accidents that might occur. Due to this, we must keep a safe distance of the table from other places or equipment in the nearby working area.
Take care of the ambiance
We should establish a proper kind of ambiance before beginning with the operating of the router table. There shouldn’t be any kind of moisture in the ambiance at the place where we are using the router table.
Otherwise, it might affect the quality of the table and can result in corrosion and rust of the various parts and components.
It must be away from the loose electrical connections and other such things that might cause an injury to us.
Size of the Workpiece
The size of the workpiece varies from our requirement. Hence, we require to carry out woodworking on both large and small size workpieces. Hence, the router table must be able flexible in its approach and can carry any kind of workpiece with an use. The large size workpiece requires more attention, whereas the small size ones require a lot of precision as well as accuracy.
Only use with the Routers
Another thing that we must keep in mind, is to use the Router Table only with routers. It is specially designed for the same purpose only. Anything other than that can also result in accidents and injuries to the people. Due to this, it is necessary for us to NOT USE THE TABLE ANYTHING EXCEPT THE ROUTERS.
Carrying out the Maintenance Properly
Well, carrying out the maintenance of the router table at a regular interval of time is extremely necessary. This increases the durability as well as the reliability of the router table.
And we will be easily able to use it till a long period of time without any kind of worries. It also removes the worn out parts and unnecessary elements and dust particles from the system of the router table.
Read | Top 10 Router Tips and Tricks You Should Know Right Now!
Conclusion
In the present article on, 10 Safety Tips When Using A Router Table we have given a brief overview of the must follow steps that we must take into consideration while using a Router Table. Following these steps, we will be easily able to use the router table with safety neglecting any kind of possibility of accidents or injury to the operator.
We hope this article will be helpful to you in determining the Safety Tips When Using A Router Table and will make your working with the table extremely safer. Give your feedback and share experience of using our known blog with us. Do provide our team an opportunity to serve you better.
Hung is the lead writer at BeingWoodworker.com, where he brings over a decade of expertise to the craft of woodworking. With a Fine Arts degree specializing in Woodworking, Hung has a wealth of experience in creating intricate and high-quality wooden pieces. His extensive background includes working on diverse projects, from bespoke furniture to artisanal home décor. As a passionate advocate for the craftsmanship of woodworking, Hung provides valuable insights and practical tips through his writing. Follow his journey and get inspired by his work on Instagram.